Series Z5 – Automatic transformer testing systems
A complete range for testing single-phase, three-phase and toroidal transformers, sized to power ratings, voltages and production volumes, from benchtop units to rotary tables.
Who it is for: manufacturers of power-supply and medium-power transformers.
Tests
Standard: electrical resistance, dielectric strength, measurement of electrical parameters.
Optional: earth bond, insulation, turns ratio, inductance, induced voltage test, secondary phasing, iron and copper losses, efficiency, Surge Test, Delta T measurement.
Models
| Model | Purpose |
|---|---|
| Z5/NCP (low power) | Low-power single-phase and three-phase transformers, small and medium volumes, 1 or 2 alternating stations |
| Z5/NCP (medium power) | Transformers from 30 to 200 kW (higher on request): copper and iron losses, efficiency, induced voltage, turns ratio |
| Z5/NCP-RT | Rotary table for small transformers and large production runs, cycle of a few seconds, robot automation |
| B10/MRS | Benchtop instrument for the turns ratio of large transformers, accuracy better than 0.1% |
Measurement data
| Test | Values |
|---|---|
| Electrical resistance | Kelvin 4-wire, 0.001 Ω–20 kΩ, 0.05 mΩ resolution, accuracy better than 0.5% |
| Dielectric strength | 40–3,000 V AC (up to 50 kV on request), trip 0.5–30 mA |
| Insulation | 40–2,800 V DC, 200 kΩ–1 GΩ |
| Earth bond | 10 and 25 A AC |
| Induced voltage | 4× rated frequency and 4× rated voltage, turn-to-turn short check |
Configuration
8 to 32 terminations, 1–3 external workstations, 19″ touch Panel PC, data bank with filters, batch and serial number management, interface to line PLC.
Downloads
Included with every machine: one day of training at Aimotix, free TeamViewer remote support during the warranty period, calibration certificate, CE declaration, manual in Italian (other languages on request).
Quotations: sales@aimotix.com · General information: info@aimotix.com
Landline +39 011 024 1424 | Mobile +39 344 060 6405