Series O – Functional testing of die-cast rotors

Fast, bar-by-bar measurement. In three rotor revolutions (600 ms at 300 rpm) Series O compares the part with the MASTER curve and flags every defect with a GO / NO GO result.

Who it is for: manufacturers of die-cast rotors and induction motors, in the laboratory or on automatic lines with robots.

Detectable defects

  • Broken bars
  • Blowholes or widespread porosity
  • Incorrect bar skew angle
  • Aluminium alloy quality
  • Infiltration between laminations
  • Bars bonded to the iron

Models

Model Purpose Key data
O6/C Small and medium rotors, stand-alone or in-line Outer Ø 25–120 mm, length 40–150 mm (up to 400 mm optional), max 300 rpm, EN IEC 60204-1
O16/C Automatic lines with loading/unloading robot Outer Ø 40–250 mm, length up to 500 mm, max 400 rpm adjustable, EN 61010
O1/C Large rotors, small volumes Sensor mounted on a lathe or customer fixture, same technology as the other systems

O6/C and O16/C are available in a manual version (M), rugged and straightforward for a few part numbers, or an automatic version (A): sensor position stored for each rotor code and automatic changeover with stepper motors.

Software

Three LabVIEW environments on an 18.5″ Panel PC: Setup (MASTER curve acquisition, thresholds per defect type), Testing (real-time waveform, part counter), Statistics (reject analysis and export). Optional spectral analysis in the frequency, time and envelope domains with 7 error indicators. PDF reports and Excel or Access export.

Downloads

Included with every machine: one day of training at Aimotix, free TeamViewer remote support during the warranty period, calibration certificate, CE declaration, manual in Italian (other languages on request).

Request a Series O demo

Quotations: sales@aimotix.com  ·  General information: info@aimotix.com
Landline +39 011 024 1424  |  Mobile +39 344 060 6405